1. Unpack the luminaire, remove the two screws on sides of the ceiling box with hex key
(included).
2. Open the box.
3. Strip the mains cable.
Put the cable through the hole in the ceiling box cover and fix this cover on the mounting surface
with X3 screws set (doesn’t included).
4. Connect mains cable to terminal (max 2,5 mm2) in accordance with connection diagram and
polarity shown. Fix the luminaire on the ceiling box cover with two screws from both sides of the
box using the hex key (included).
These instructions assume expert knowledge corresponding to a completed professional
education as an electrician.
Overall and installation dimensions, mm
1.
19