1. Tools needed.
2. Switch mains power off. Unpack the luminaire.
3. Drill mounting holes in bearing surface, D – distance between holes. Attach bracket to bearing
surface, hardware kit is not included in delivery set. Lock the luminaire in desired position with
screws. Maximal tightening torque: for M5 screws - 8Nm, for M8 screws - 16 Nm.
4. Connect luminaire to mains.
4.1. Connection through cable connector:
4.1.1. Strip mains cable (max 2,5 mm2). Cable connector allows entry of round power cable with
outer diameter 7-12 mm.
30
