LIGHTFORCE AUSTRALIA PTY LTD • 11 Manton Street, Hindmarsh SA 5007 Australia • www.lightforce.com | email: [email protected]
Australia: Tel: 08 8440 0888 | Fax: 08 8346 0504 • Int’l: Tel: +618 8440 0888 | Fax: +618 8346 0504
All logos and images are subject to relevant trademark and copyright protection LIGHTFORCE Pty Ltd | © AUGUST 2016 • Data and specifications contained maybe subject to change without notice.
LIGHTFORCE Australia Pty Ltd shall not be liable for damage, malfunction, failure resulting from accident, misuse, misapplication, unauthorised repair, neglect, modification, unauthorised or non standard replacement parts,
accessories, bulbs, batteries or voltage or operation of the product beyond its technical and or environmental specification.
INSTRUCTION DATA
PRODUCT:
RED / IR ENFORCER LED 140
VER:
1.0
DATE:
AUGUST 2016
Voltage Indicator
Runtime (Full Intensity)
4 hours
Flashing
Green
3.8 hours
2.8 hours
1 hour
Flashing Red 10 minutes - reserve mode follows
Charging Status
Charging Status
All Off
Fully charged (100%)
Flashing
Green
60%
Flashing
Amber
30%
Flashing Red Less than 5%
Internal handheld battery will charge when connected to 12V DC power. Please note that battery charge indicator does not
work whilst light is turned on.
RoHS Compliant
3 year warranty (excluding internal battery)
INTERNAL BATTERY: Li-Ion Polymer, 2Ah battery 14.8Wh - Built in LED charge level indicators - Built in LED charging status
indicators - UN38.3 certified
KIT CONTENTS: 1 x 100-240V universal AC to 12V DC power supply 1 x Enforcer LED 140 handheld light
OPTIONAL ACCESSORIES:
Compatible with the Lightforce Ni-MH Enforcer battery (BPEF). This provides an extended runtime of up to 18.5 hours
Enforcer mounting bracket (EFMB)
Cord options:
• 2m coil cord with merit plug for use with Lightforce SLA or LiFePO4 battery packs (SLCORDCP)
• Figure 8 flex with alligator clips for direct battery connection (SLCORDAC)
The dimmer lever has dual functionality. Constant red is achieved with the lever in the up position. Moving
the lever down changes light output to minimum IR and maximum IR intensity is achieved in the down
position.
Operation of the variable power light at reduced brightness levels saves power and extends battery life.
- IR