Actual product characteristics may vary. Light Culture Australia Pty Ltd reserves the right to improve, modify or update the product designs without prior
notice.
www.lightculture.com.au
–
Ensure the supply cord is not subject to mechanical stress
–
Keep 10–20mm distance between the end of the profile and the end mounting piece
–
The bend angle should be less than 15 degrees when installing LED Neon into the profile by
hand
–
Avoid placing mechanical stress on the front connector cable
–
Do not curl or bend the front connector cable with excessive force
–
Avoid installing the profile less than 10mm from the end mounting piece
–
Install the LED Neon into the profile in one direction, don’t let it bow in the middle
PULL
NEON CLASSIC | ELECTRICAL AND PHYSICAL INSTALLATION GUIDE
PROFILE INSTALLATION REQUIREMENTS