Contents
Lightcloud Controller
Instruction Manual
Wire Nuts
NPT Nut
O-ring
x 4
x 2
Specifications
PART NUMBER
LCCONTROL20/D10
INPUT
120-277VAC, 50/60Hz
<2W (Standby - 4W (Active)
MAXIMUM SWITCHED LOAD RATINGS
For Control of Magnetic, Electronic Ballast or LED
277VAC: 20A Magnetic/Resistive
240VAC: 5A Tungsten/Electronic, 20A FLA/
60 LRA, 2HP
120VAC: 15A Tungsten, 1HP
OPERATING TEMPERATURE
-40°C to +40°C
OVERALL DIMENSIONS
1.55" diameter, 5.75" length
1/2" NPT Mount, Male
16AWG pigtails
WIRELESS RANGE
Class 2
IP66 Rated
Indoor and Outdoor Rated
Wet and Damp Location
Plenum Rated
Line-of-Sight: 1000 feet
Obstructions: 100 feet
Controller requires constant, unswitched power. Any wires not in use
must be capped off or otherwise insulated. This product should
only be installed by a qualified electrician and in compliance
with local and national electrical codes.
!
PINK
Controller
Lightcloud
™
RESLC/XXX
EXISTING
OCCUPANCY
SENSOR
WHITE/RED
WHITE
BLACK
BLACK
RED
RED
P
UR
P
LE
R
ED
WHITE
WHITE
WHITE/RED
BLACK
WHITE
LOAD
RESLC/XXX, where XXX=120
for 12VAC applications or 277
for 277VAC applications.
ADVANCED TRIGGER:
Designed to use a third-party occupancy sensor
to detect occupancy without that sensor directly controlling the lights.
Controller will function as an occupancy sensor in this mode.
POWER MEASUREMENT:
The Lightcloud Controller is capable of
measuring the power usage of the attached circuit.
POWER LOSS DETECTION:
If mains power to the Controller is lost,
the device will detect this and alert the Lightcloud application.
EMERGENCY DEFAULT:
If communication is lost, the Controller may
optionally fall back to a specific state, such as turning the attached
circuit on.
