ENGLISH
I Preface
This Manual includes the important information of installation and operation. Please install and
operate the light according to the instructions strictly. And it must be power off when open the light
or before repair.
A: Please read the complete contents of this manual (please keep this manual attach with the light
for any preview)
B: In order to make sure the correct and safety installation, operation and maintenance, well know
and follow to the instructions of Manual is necessary.
C: We will not take any responsibility to the light damage, property loss or body injure which caused
by the incorrect installation, operation and maintenance.
NOTICE: The data which inside the Manual maybe changed due to the continuous improvement, and
we’ll not make another notice. We will keep the right to any specification update during
improvement
Warning:
it should be changed if the protection screen, lens or UV screen got a visible damage, e. g.:
scratch or chasm, the light should keep away from fire and water to avoid it get into the light.
Unpacking Instruction
Please check if all the contents are completed after unpacking. Then, check if the light is undamaged.
Please you can keep the or
iginal package and return to the factory if it’s damaged
.
II Safety specifications
1)
This device for indoor use only, the protection grade is:IP20
2)
Installing of the light must keep a distance with any flammable objects by 5m at least. The
distance between the light and the projected objects must be no less than 1m.
3)
Please never directly install the light on the surface of the flammable objects.
4)
The installation, operation and maintenance must be managed by the qualified professional,
and make sure to operate it under the instruction of the Manual.
5)
Make sure the work environment temperature of the light maximum 40*C, and minimum -
20T;
6)
The temperature of the light surface will up to 60T) even under the normal cooling, so never
touch it by hand.
7)
The light was designed by electric shock protection type, and must connect to the power
supply system which well earthed. Furthermore, the ground wire of the light must connect to the
ground wire of the power supply system, ground wire interface of the light must well connect with
the light body (or light must be well earthed)
8)
Please check if the voltage is in accordance with the rated power before installing.