3
z
During long periods of non-use, disconnect the unit’s main power.
z
Always mount this unit in safe and stable matter.
z
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to the point they exit from the unit.
z
Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See “Cleaning” for
details.
z
Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce heat.
z
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in performance.
Technical Specifications
Electrical
Power supply:……………….…electronic auto-ranging
Input voltage range:…………… 90-250V, 50/60Hz
Fuse:…………………………… 5 A@220V
Power consumption:……………300W@230V
Optic
Light source: LumiEngin 200W White LED
LED lifespan: 60000 hours
Dimmer: Smooth dimmer from 0-100%
Fixed gobo wheel: Open
Rotating gobo wheel: Open
Color wheel: Open
6 8-facet dual prisms
Motorised focus
Motorized
Pan/Tilt
Pan movement range: 54
0°
Tilt movement range: 270°
16 bit movement resolution
Automatic Pan/Tilt position correction
Pan movement 0°-540°at max speed: 2.2 sec.
Tilt movement 0°-270°at max speed: 1.2 sec.
LCD operation
Built-in demo sequences
Silent fans cooling
Strong three-phase motors
Stand-alone operation
Iris
Linear frost