Screws
Mounting
hole
Hook
Install the cable clamp
Mounting the Boiler Switch
You can now close the boiler casing by
following the relevant instructions from
your manual. It is recommended to
mount the Boiler Switch to the wall next
to the boiler in a suitable place. The
backplate includes two screw holes
which allow the plate to be mounted to a
wall using suitable screws. Once
mounted, the main unit can be slotted
back into place and the screws
tightened.
Once the cable(s) have been connected,
the cable clamp needs to be reattached in
order to secure them and to ensure that
they cannot become dislodged from the
terminal connections. The cable(s) should
run thorough holes situated at the base of
the unit.
Holes
Clamp
Completing the Install
Installation
