1. First remove all the parts from the package. Verify all the listed parts
are included.
2. Safety remove contents of the Steam Cleaner system and lay them out on
a flat surface to see that you have all the components to complete the
assembly.
Attachments
3. Attach the top of the brush connection to the unit into the notch.
4. Next, secure the pointed end of the brush connection around the bottom
of the unit and snap into place ( Fig. 1)
5. To remove the brush connection, gently pull on the pointed end and lift the
brush connection off the unit. ( Fig. 2)
6. Attach the top of the brush connection to the unit into the notch. Next,
secure the pointed end of the brush connection around the bottom of the
unit and snap into place.
7. Push round brush into brush connection. (Fig. 3)
There may be a little water in or around the water tank assembling your
steam cleaner, because we have tested all of our steam cleaner before
packing to provide the best quality of our products.
Caution
The seam on the brush connection must line up with the seam on the unit
proper use and safety.
The brush connection will snap into place, double check to make sure seams
are aligned.
For safety, please remove the brush connection after unit cool down for
10 minutes.
Make sure you only add water to the tank. Chemicals or cleaning solution
may damage the appliance and could be unsafe for you and your family.
