LEGO GHOSTBUSTERS ECTO-1 10274 LIGHT & SOUND KIT INSTALL GUIDE
INSTAL ATION GUIDE
48
STEPS
49.
50.
5cm Connecting Cable
Ensure you connect
the 5cm Cable to the
6-Port Expansion
Board from step. 36
NOT from step. 35
Siren lights on each
side should be
rotating in opposite
directions
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND:
DISCONNECT
TURN / FLIP
TWIST / BRAID
DIRECTIONAL
POWER ON / TEST
CONNECT / RECONNECT
