LIGHT MY BRICKS LEGO Porsche 911 RSR 42096 Lighting Kit, User Manual

Page: 48 / 52

22.) Take both tail light sections and connect all four bit light cables to the 8-
Port Expansion Board inside the trunk of the car. Turn the Battery Pack ON to
test the tail lights are all working OK.
Note: If you experience any issues with the lights not working and suspect an
issue with a component, please try a different port on the expansion board to
verify where the fault lies (with the light or expansion board). To correct any
issues with expansion board ports, please view the section addressing
expansion board issues on our
online troubleshooting guide.
23.) Disconnect the tail lights, then twist the two cables from each tail light
section around each other all the way to the ends to form one larger cable.