BRICK BANK 10251 LIGHT KIT INSTALL ATION GUIDE
INSTALL ATION GUIDE
33
LEGEND:
DISCONNECT
TURN / FLIP
TWIST / BRAID
DIRECTIONAL
POWER ON / TEST
CONNECT / RECONNECT
Firstly, ensure that the
batteries have power using
a battery charge gauge.
If the batteries have no power,
replace the batteries.
If the batteries still have power,
check to see if the batteries
have been inserted correctly
into the battery pack.
Troubleshooting
CHECK FOR CR2032 BATTERIES
USING THE FLAT BATTERY PACK
Inside the battery pack is a symbol
indicating which side the (round)
CR2032 battery should be inserted.
Check that the “+” side of the battery
pack has the battery with the “+”
symbol facing downwards.
On the opposite side, the “-” side of the
battery pack should have the battery
flipped upside down, that is the “+”
symbol facing upwards.
TROUBLESHOOTING
