LEGO CHRISTMAS WREATH 2-IN-1 40426 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 29
9
Legend
DISCONNECT
CONNECT /
RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
Rotate the leaf
piece to hold the
wires threaded
behind it.
Replace the leaf
pieces removed in
step 1.
Plug the 5cm
Connecting Cable
from step 8 into the
12 Port Expansion
Board from step 3.
B
P
P
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.