![background image](http://html1.mh-extra.com/html/light-my-bricks/70657/70657_instructions-manual_1911661001.webp)
Light My Bricks: LEGO Ninjago City Docks
70657 Lighting Kit
The following page is the instructions for the Light My Bricks LEGO Ninjago
City Docks (70657) LED light kit.
To ensure a trouble-free installation of your light kit, please read and
follow each step carefully.
If you run into any issues, please refer to the online troubleshooting guide.
Please note: This page lists instructions for the
LED light kit only.
. . .
Package Contents:
•
8x White Strip Lights
•
1x Blue Strip Light
•
10x White 15cm Bit Lights
•
2x Orange 30cm Bit Lights
•
4x 6-Port Expansion Boards
•
1x 8-Port Expansion Board
•
1x Flicker E ects Board
•
5x 5cm Connecting Cables
Summary of Contents for 70657
