LEGO PORSCHE 911 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
16
12
13
Legend
DISCONNECT
CONNECT /
RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
The interior light
should activate when
the door is opened and
deactivate when the
door is closed.
You may need to adjust
the position of the NC
Push Board to ensure
the door pushes the
trigger when closed
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Pull the Bit Light
Cable up behind the
driver seat