4.3
BASIC INSTRUCTIONS FOR DMX512
OPERATION (STAGE1)
MASTER DIMMER
●
CH1 controls the intensity of the currently projected color
●
When the slider is at the highest position (255) the intensity of the output is the maximum
RED, GREEN & BLUE & WHITE COLOR SELECTION
●
CH2, CH3 & CH4 & CH5 control the intensity ratio of each of the RED, GREEN, BLUE &
WHITE LEDs.
●
When the slider is at the highest position (255) the intensity of the color is the maximum.
●
CH2, CH3, CH4 & CH5 can be combined together to create over 16 million colors.
COLOR MACROS
●
CH6 selects the required COLOR MACRO
●
CH6 has priority over CH2, CH3, CH4 & CH5
●
CH1 is used to control the intensity of the COLOR MACRO
STROBE
●
CH 7 controls the strobe of CH1 to CH6
●
Strobe 1 is with RGB in-step
●
Strobe 2 is with RGB out-step
●
Strobe 3 is a pulse strobe(fast on/slow off)
●
Strobe 4 is a pulse strobe (slow on/fast off)
●
CH7 has priority over CH2, CH3, CH4 &CH5.
ID ADDRESS SELECTION
●
CH9 is used to select the target ID address.
●
Each independent DMX address may have upto 66 independent ID addresses.
●
An ID address of 0 will activate all ID address locations.
AUTO
●
CH8 selects the preset AUTO programs AT.01-AT.10 or the custom AUTO programs CUS.01-
CUS.10
●
When activating the custom AUTO programs CUS.01 to CUS.10 then it is possible to control
the STEP TIME and FADE TIME using CH2 and CH3 respectively.
●
CH8 has priority over CH2, CH3, CH4, CH5, CH6 & CH7.
DIMMER SPEED
●
CH10 is for selecting the dimmer mode and dimmer speed. When DIMMER is set to
【
Off
】
,
then RGBW and MASTER DIMMER are linear. The Dim 1/2/3/4 are different speed of the non
linear dimmer .
19
HSV
1
2
0
255
CHANNEL
FUNCTION
VALUE
3
0
255
0
255
VALUE(0~100%)
SATURATION(0~100%)
HUE(0~100%)
DIMMER SPEED
LINEAR DIMMER
NON LINEAR DIMMER 1
（
fastest
）
0
50
51
100
101
150
151
200
201
255
NON LINEAR DIMMER 2
NON LINEAR DIMMER 3
NON LINEAR DIMMER 4
（
slowest
）
100
4
