FREQUENT ANSWERED QUESTIONS
Symptom
Fault
Unit does not power up
Check that the power outlet is turned on
and fuse is intact
Unit powers up but no light
appears
Check that the mode is set correctly and
that you are controlling the unit correctly
Unit chases constantly and not to
the beat of the music
Check that the microphone sensitivity is
not turned up too high and that the mode
is set correctly
Units do not work or is
uncontrollable when linked or in
DMX mode
Check that the mode is set correctly,
check that all the leads are OK, check that
the controller is set to pin 3 positive
(If linking, the lead should come out of the
Master/Slave output socket)
(If using DMX, the lead should come out of
the DMX output socket)
SPECIFICATIONS
Voltage:
240V AC
Power Consumption:
UVLED 12W, UVLED : 55W LEDSTROBE: 12W
Operating Frequency:
50Hz
Power lead:
Fixed
Fuse:
M205 2A fast blow
Sound activated:
Yes with sound sensitivity control
Stand alone mode
Yes
DMX:
3 channels
Ch1: Dimmer , sound active and auto modes
Ch2: Flash speed and auto speed
Ch3: Dimmer
Linkable
Yes
Effects / Control:
Dip switches
Colour:
UV
Output power / level:
UVLED and LEDSTROBE : 192 5mmLEDs
UVLED1: 48 1W LEDs
Input connection:
Power: Male IEC
DMX: Male 3 pin XLR
Output connection:
DMX: Female 3 pin XLR
Rated lamp life:
50 000 Hrs
Beam angle:
UVLEDn and LEDstrobe: 20 degrees
UVLED1: 28 degrees
Hanging Bracket
Yes
Colour:
Black
Weight:
UVLED and LEDStrobe : 2.2Kg
UVLED1: 3.1Kg
Dimensions:
UVLED and LEDStrobe: 356 x 248 x 165mm
UVLED1 : 368x241x84mm
www.lightemotion.com.au
8/8
