4
To replace the fuse please follow the following steps:
1. Turn off unit and disconnect from mains.
2. Remove the fuse holder cover with a screwdriver.
3. Remove existing fuse.
4. Fit new fuse.
5. Refit the fuse holder.
Fuse: 3AG 15A fast 250V
POWER:
CAUTION
: This lighting effect is designed to operate at 230V 50Hz.
Power Consumption: 1500W
Fuse:
3AG 15A fast 250V
FEATURES:
ST1500 has power indicator (red) and DMX indicator (orange) at back panel.
The
ST1500 can be operated in Manual dimmer control, Sound active control and DMX
control.
- Manual control mode
1. Select dip switch all “off”.
2. Connect ST1500 to main power supply. Red indicator would be on.
3. Adjust the strobe speed and brightness.
- Sound active mode
1. Select dip switch 9 “on” and the rest are all “off”.
2. Connect ST1500 to main power supply. Red indicator would be on.
3. Adjust sound sensitivity.
- 2 Channel DMX control mode
1. Select dip switch 10 (on), use dip switch 1 to 9 to select DMX address.
2. Connect DMX cable to DMX512 controller.
3. Connect ST1500 to main power supply, red and orange indicators would be on.
4. Use DMX controller to adjust speed and brightness. Channel 1 controls speed and
channel 2 controls the dimmer.
SPECIFICATIONS:
• Weight: 4.5kgs
• Size: 550×290×200mm
• Voltage: AC230V 50Hz
• Power consumption: 1500W
• 3PIN female DMX XLR socket and 3PIN male DMX XLR socket
• Dip switch
