5
Black Out mode:
Press “BLACK OUT” to turn the LED lights on/off.
Select program Mode:
Use PROG button to select auto run mode / built in programs mode. LEDs will indicate
you current mode. When red LEDs are on after you press PROG, unit is in built in
programs mode. When green LEDs are on after you press PROG, unit is in auto run
mode.
1.
Select built-in programs.
Press PROG to select built in program mode (red LEDs should light on), then use “+” or
“-” to select 12 built-in programs. You can also press FLASH to set the program fade
speed and then press “+” or “-” to adjust it. Press SPEED to set the program running
speed and then press “+” or “-” to adjust it.
NOTE:
“Pr.01” is static color program. There are 15 colors to choose. Press the SPEED
button to enter the static color submenu, and then pressing “+” and “-” buttons to scroll
through the static colors.
Program 01: static color.
Program 02:
Fifteen color slow dream.
Program 03:
Fifteen color fade change
.
Program 04:
Fifteen color jumping.
Program 05:
Fifteen color signal direction flow.
Program 06:
Fifteen color double direction flow.
Program 07:
Fifteen color signal direction flow+ dream 1.
Program 08:
Fifteen color signal direction flow+ dream 2.
Program 09:
Signal direction section flow 1.
Program 10:
Signal direction section flow 2.
Program 11:
Double direction section flow.
Program 12:
Fifteen color mixing.
Select auto run mode:
Press PROG to select color change mode (green LEDs should light on), then use “+” and
“-“to select color changing speed.
Color dreaming mode:
Press PROG to select color dreaming mode (blue LEDs should light on), then use “+” or
“-” to select the color dreaming speed.
Master and slave mode:
Press SLAVE/SA button to set the LED light to slave mode.
Manual colour mode:
Press R/G/B/W to choose the four different colors, then press “+” and “-” to adjust
brightness of RGBW individually.
DMX MODE:
You must set the DMX Channel mode before you set your DMX address.
