Light Emotion FLAT1012, User Instruction Manual

Page: 6 / 9

6
1) Manual dimmer color select
Press ‘MODE’ button until the display shows red ‘ ~ ’, then press the ‘SET UP’ to
choose different color, green ‘ ~ ’, blue ‘ ~ ’, white
‘ ~ ’ and UV ‘ ~ ’, then press ‘UP’ or ‘DOWN’ button to set the
dimming rate 0 to 255.
2) Flash speed select
Under manual dimmer color mode, press ‘SET UP’ until the display shows ‘ ~’, then press
‘UP’ or ‘DOWN’ button to select the flash speed 00 to 15, 00 is flash off, 01 is the slowest flash
speed, 15 is the fastest flash speed.
2. Sound active mode
Press ‘MODE’ button to select the sound active program mode.
1) Sound active program mode select
Press ‘MODE’ button until the display shows ‘ ~ ’. Press ‘UP’ or ‘DOWN’ to select
the sound active program mode 1 to 8 under this mode.
2) Sensitivity select mode
Under sound active mode, press ‘SET UP’ button until the display shows ‘ ~ ’, then
press ‘UP’ or ‘DOWN’ to select the sound active the sensitivity 1 to 8. 1 is off sound-active, 2 is
the lowest sensitivity, and 8 is the highest sensitivity.
3. Auto-run program mode
Press ‘MODE’ button, select the auto-run program mode. There are 4 auto-run program modes to
be selected by pressing the ‘SET UP’ button. Press ‘MODE’ button until the display shows
‘
~ ’, ‘ ~ ’, ‘ ’ or ‘ ~ ’.
1) Color dreaming program mode select
Under auto-run program mode, press ‘SET UP’ button until the display shows ‘ ~ ’,
then press ‘UP’ or ‘DOWN’ button to select the eight color dreaming programs 1 to 16.
2) Color jumping program mode select
Under auto-run program mode, press ‘SET UP’ button until the display shows ‘ ~ ’,
then press ‘UP’ or ‘DOWN’ button to select the eight color jumping programs 1 to 16.
3) Auto dreaming & jumping mode
Under auto-run program mode, press ‘SET UP’ button until the display shows ‘ ’, and then
the dreaming mode and jumping mode will run in a continuous cycle. ‘UP’ or ‘DOWN’ buttons are
no function in this mode.
4) Color dreaming & jumping speed select
Under auto-run program mode, press ‘SET UP’ button until the display shows ‘ ~ ’,
then press ‘UP’ or ‘DOWN’ button to select the color dreaming/jumping speed 01 to 16, 01 is the
slowest speed, 16 is the fastest speed.
4. Static color select mode
Press ‘MODE’ button to select the static color select mode. There are 2 static color select modes.
You can select them by pressing the ‘SET UP’ button.
1) Static color select
Press ‘MODE’ button until the display shows ‘ ~ ’, then press ‘UP’ or ‘DOWN’ to
select static color 0 to 31. Please refer to color macros table.
2) Flash speed select
Under static color select mode, press ‘SET UP’ button until the display shows ‘ ~ ’,
then press ‘UP’ or ‘DOWN’ button to select the static color flash speed 00 to15, 00 is flash off, 01
is the slowest flash speed, 15 is the fastest flash speed.