●
Instructions
After unpacking, check whether the projector has been damaged by transport such
as any screw loosening, reflecting mirror broken, etc. If everything is OK, select a proper
location, hang the projector and adjust its angle properly, then connect the power cord
and the ground wire before switch on at the means. Notice that while using this projector
the green and yellow wire has to connect the ground properly by professionals. Please
examine the electrics and voltage before power on it. We suggest customer apply 220V
or a transformer. 20 seconds after powered on the projector, it will self-check and then
can be used.
Owning to the radiate laser generator `s own characteristic and for the laser `s long
life span, please terminate it for 10 minutes after using it for 30 minutes.
Avoid being interfered by other signals while using the DMX-512 signal controller.
●
Technical Parameters
：
Rated voltage: AC110V /AC230V ±10
％
Rated frequency: 50HZ~60HZ
Power consumption: ≤15w
Laser wavelength
：
25
－
120mW/532nm
、
100mW/650nm
Laser source: solid semiconductor laser generator
Color: emerald green, red
Control channel: 5CHs
Control mode: music control or DMX-512 signal control, master and slave,
automatically run.
Cool system: fan
Operating environment: indoor
This firefly series has controlled by on/off switch address code. 10 is the exchange
switch of sound activated control and DMX512 signal control. Please find details as
follow:
mode
Control switch
（
ON
）
1
DMX-512 control
10:OFF
2
Single projector
controlled by sound
1—9:OFF
，
10:ON
3
Automatically run
1:ON
、
10:ON
4
Master projector
controlled by sound
1—9: OFF
、
10
：
ON
5
Master projector by
automatically run
1
：
ON
、
10
：
ON
6
Slave projector
2
：
ON
、
10
：
ON
2
