2 of 4 pages
Congratulations on the purchase of your DMXDIM4LED (upgrade version of 4 channel DMX 512 dimmer
pack) by Light Emotion. It has 16 user-selectable chase patterns, 3 channel control modes, adjustable
speed control and dimming with or without DMX. We are confident that you will be satisfied with your
purchase. We have prepared this manual to assist you with the operation of this item.
Power:
CAUTION
: This lighting effect is designed to operate on 240VAC
Power Consumption: 100W
Fuse: M205 10A fast blow for DMXDIM4LED, M205 6.3A fast blow for each channel.
Operation:
Dimmer/switch packs are mainly used for lamp based par cans, Damage may occur if connected to a unit
with an electronic (switch mode) power supply. The DMXDIM4LED allows you switch on & off loads with
electronic (switch mode) power supplies such as Laser and LED fixtures.
BEFORE this can be done you
must ensure there are no devices connected to the dimmers outputs and put the fixture into
“switch” mode
.
1. Changing between “Dimmer” mode and “Switch” mode:
A.
Make sure there are no fixtures connected to the output channels, if there are please disconnect
these fixtures.
B.
Turn on the DMXDIM4LED.
C.
Press the “mode” button until “A001-A512” appears
D.
Press the “menu” button until “S1**”, “S2**”, “S3**”, “S4**” appears
E.
You can now use the “up” and “down” buttons and select either “oN” or “oF”. When “On” is selected
the particular channel will be in “Switch” mode. “Of” will set the channel on “dimmer” mode
F.
Repeat steps 1-5 for the rest of the channels.