by
FOR LIGHT EFFICIENT DESIGN PRODUCT INFO CALL
Light Efficient Design
•
188 S. Northwest Highway
•
Cary, IL 60013
•
847.380.3540
•
led-llc.com
FOR REMPHOS PRODUCT INFO CALL
RemPhos by Light Efficient Design
•
30 Log Bridge Road, Building 200
•
Middleton, MA 01949
•
877.997.3674
•
remphos.com
01.15.2019
Information is subject to change without notice.
ON/OFF SWITCH
A red button located on the bottom right area of the lamp.
Press and hold to turn on and of
f.
PIR MOTION SENSOR MODE
Dims the brightness of the lamp until dawn to 10% with the
motion
sensor active. Once the motion sensor is active it will shine at full brightness for 30 seconds.
TIMER MODE
The first 3 hours of use will project 25% of the total light output and then switch
to Mode 1.
FULL BRIGHTNESS MODE
The
light will be at 100% brightness until dawn.
NOTE
400 lumens is 100% light output
MODES SWITCH
To change the modes on the light, short press the red button to
cycle between mode 1,2, & 3.
DUMP ENERGY INDICATOR
4 blue LEDs: 8+ using days / 3 blue LEDs: 6+ using days
2 blue LEDs: 4+ using days / 1 blue LEDs: 2+ using days
Note: It is normal that different LEDs number will be on in different mode.
Special Note
Do not install the lamp away from the sun, under a shadow or between two
buildings where the height of one building will affect how much light the product
receives. Not installing with enough sunlight will lead to insufficient absorption of
sunlight and insufficient brightness and time;
Do not use the lamp in an environment with a temperature above 113 F or below
32F, otherwise the battery can be permanently damaged.
Do not use non-standard installation accessories to install the lamp. This will void
the warranty.
Please be aware of your location to determine the most optimal mode for your
satisfaction.
