Light Bright
Formled 9 AUV
14. Information
This device complies with the CE directive:
• in terms of the directive: 2014/35/EU Low Voltage Directive, (Directive
2014/35/EU of the European Parliament and of the Council of 26.02.2014 on the
approximation of the laws of the Member States relating to electrical equipment designed
for use within certain voltage limits)
•
in terms of the directive: 2014/30/EU Electromagnetic Compatibility (Directive 2014/30/EU
of the European Parliament and of the Council of 26.02.2014 on the approximation of the
laws of the Member States relating to electromagnetic compatibility)
The device complies with IP65 and is therefore protected against dust and water jets from
any angle according to DIN EN 60529 as of 02.2020.(Germany)
To guarantee the protection against splashing water according to protection class IP65 for
the DMX sockets, the special DMX input and output sockets must be closed correctly with
the IP65 special XLR plugs or the rubber sealing caps must be used for closing. The power
sockets POWER IN and POWER OUT are splash-proof according to IP65 when correctly
plugged in, also when the rubber sealing caps are used correctly.
During operation, it is mandatory to connect the device to a power supply system equipped
with a powerful grounding (Class 1 device according to EN 60598-1). Furthermore, it is
recommended to protect the supply line of the equipment from indirect contact and/or short
circuits with correctly dimensioned residual current circuit breakers.
Only use the device if the room temperature is below 45°C.
Before starting any maintenance on the unit, it must cool down for at least 10 minutes after
disconnection from the power supply to minimize the risk of damage to the electronic
components. For maintenance or repair work on the chips, the device must cool down for at
least another 20 minutes to prevent burning.
14
