Insert the 10-24x1-1/2” screw through the Coupling and Mast Stub. Loosely tighten
the 10-24 anti-vibration hex nut. Fully tighten after the next step.
Align the Boom to be parallel with the Reflector Strut as shown. Then using a 3/16
Hex Wrench, firmly tighten the Hex Head Screw in the Boom Coupling. See
previous step and firmly tighten the 10-24 anti-vibration hex-nut.
Using a Phillips Screwdriver, loosen and remove the 10-24x1-1/2” screw and 10-24
anti-vibration hex-nut from the Boom.
Assembly Instructions
10
MaxRange Ultra Antenna
