ligado NETWORKS MSAT, User Manual, Page: 21 / 29

30 31 LIGADO NETWORKS MSATe USER GUIDE
GPS Menu
You can obtain GPS information by selecting the GPS option on the
Main Menu.
The GPS Menu has the following options.
• GPS On/Off
• Save Position
• Stored Positions
To exit the GPS Menu, press BACK , and you are returned to the Main Menu.
GPS On/Off
You can enable or suppress the display of continuous GPS on the handset
display screen through use of this option.
If you are invoking this menu for the first time, GPS is disabled (OFF).
When GPS is enabled, GPS information is displayed or not displayed in
the following contexts:
1. In Idle State: GPS info is displayed on screen.
2. In Call: GPS info is displayed on screen.
3. Navigating through Menus (including sub-menus and associated
results): GPS info is NOT displayed on screen.
Use the Up/Down arrows to navigate to this option, and then press the
SELECT ( SK2 ) key. This will change the option display to ON or OFF,
depending on the status before you selected the option.
Save Position
This feature allows you to capture a position at a given moment and
associate it with a name tag stored in memory. The handset stores
up to 25 positions in a circular memory (when 25 positions have been
stored, storing a new position overwrites the oldest position). If you do
not associate a name tag with a saved position, the
GPS time stamp
becomes the default position identifier.
Note : that the time stamp is GPS time, or approximately Coordinated
Universal Time (UTC), not local time.
1. Press SELECT to invoke this option.
2. The latitude/longitude position is then displayed. Press STORE to
store the position.
3. You will then be prompted to enter a tag name for this position. Use
the alphanumeric keys to enter the tag name (use the CLEAR key to
backspace if you make an error). Press STORE to initiate the storage of
the position.
4. You will then be given a confirmation ( Position Stored ) and control
goes back to the GPS Menu.
Stored Positions
You can view your stored GPS positions and edit a stored position name
tag with this function.
1. Press SELECT to invoke this option. The list of stored position name
tags (latest one first) is then displayed.
2. Scroll through the list using the up/down arrows. Press SELECT when
the entry you want to edit is highlighted.
3. The full entry with name and position is then displayed. To edit the
highlighted entry, press EDIT .
4. You will then be prompted to enter the updated name tag. Use the
alphanumeric keys to enter the updated tag name (use the CLEAR key
to backspace if you make an error). Press STORE to initiate the storage
of the position.
5. Control goes back to the display of the updated tag and the position
information. You may do further editing by pressing EDIT . If you are
satisfied with the edited entry, press BACK to go back to the list so
you can choose another entry, or press BACK again to go back to the
GPS Menu.