Liftkar PTR I 14
4 OPERATION
4.1 ATTACHING THE WHEEL CHAIR
4.1.1 PLACE WHEEL CHAIR ON STAIRCLIMBER
Roll the wheelchair along the centreline of the base unit until the tyres of
the wheelchair wheels touch the wheelchair support.
4.1.2 PIVOT HANDLE UNIT TOWARDS WHEEL
CHAIR
Release handle unit and pivot it towards the wheelchair until the handle
unit is approximately vertical (parallel to the wheelchair backrest).
4.1.3 ADJUST POSITION OF WHEEL CHAIR
RETENTION BRACKETS
Position the wheelchair retention bracket directly underneath the bend in
the wheelchair handle.
By pulling on both locking pins you can adjust the vertical position of the
retention bracket to the height of the wheelchair.
4.1.4 SECURING THE WHEEL CHAIR
Adjust the position of the two slide blocks (to the left and right of the
bracket) and fix them in place by tightening the two hand bolts.
Adjust the headrest and pivot the handle unit back into the operating
position.
Keep both your hands on the handle unit while you do this. The spring-
loaded retention lever automatically moves into its front limit position.
1
2
3
4
