Liftkar MTK I 8
Switching on the step margin-brake from the neutral position:
Push up the handle
LIFTKAR braked at the step margin
IMPORTANT
When the step margin-brake is switched on, do not make strong turnings on level ground or on
1.
stair landings.
On rough ground or at grated stairs there could occur damage to the plastic running wheels of
the brake.
If you pull LIFTKAR back too much when going downstairs, it is possible that the step margin
2.
brake will continuously brake on stairs with low steps.
To release the brake you have to put LIFTKAR in a more upright position.
From step margin-brake back to neutral position:
Push the back wheel of the brake forward
Turning further by foot or hand to neutral position.
(Then the middle wheel of the 3 brake wheels is
stopped by a cam on the frame- when turning the
brake anti- clockwise.)
