32
33
Technical Specifications
Model No. SG-725-RPW
Size: 136.75 x 53.28 x 44.88 mm and Weight: 54 g (without headband)
Adjustable Headband: One Size Fits Most Head Sizes
Conductive Area: 22.3 cm² / Electrode
Conduction Method: Saline Solution
Conduction Contact: Sponge
Power Supply: DC 3.7v, 250 mAh, Lithium-Ion Battery, Micro-USB, Rechargeable
Rated Input: DC 5V, 1.5W
Operating Temperature: 0 to 50°C
Maximum Current: 1.3 mA DC
Maximum Voltage: 22v
Conformity: EMC for CE
Cleaning and Maintenance
Lightly clean the outside of the LIFTiD Neurostimulation device with a soft dry cloth only.
The electrodes are delicate and can be lightly cleaned with a soft dry cloth after every
2 to 3 stimulation sessions.
The battery USB charging port should not be cleaned. Please keep the cover on the
port at all times.
Remove the sponges immediately after a stimulation session. Rinse the sponges with
warm water. This gets out the saline solution and prepares the sponges for the next
stimulation session. Allow the sponges to dry completely in the open air either on a
plate, table or paper towel. Do NOT put wet sponges into the storage bag (unless it is
for a short period of time). Never store the sponges in the electrodes. Take “great” care
of your sponges. Keep the LIFTiD Neurostimulation device and all other accessories &
components in the convenient storage bag.