IOS Guide For
Hydraulic Control
3. After you have activated the bluetooth sequence
look at your phone and Tap the button in
the upper right hand corner of app. (See pic 2)
LiftTechRX should now appear like in (pic 3). Tap
it and the screen should now look like (pic 4). Now
tap on the pair option.
*For security reasons you
will have about 30 seconds to complete.
4. Once paired and connected to a Lift Tech
receiver, the screen similar to (pic 5), will show the
remote control options.
5.
UP
..... Tapping and holding this button will raise the lift.
DOWN
....Tapping and holding this button will lower the lift.
LIGHT
..... Tapping this button will turn your canopy light on or off.
LOCK
..... Hold for 5 seconds to lock or unlock the control panel.
NOTE: When done operating the lift, for security and IOS battery purposes, it
is advised to disconnect from the Lift Tech receiver. To do this tap <disconnect
in the upper left corner to be returned to the screen shown in pic 3.
1. Go to the App store and search for Lift
Tech and download the app. Once the
app is downloaded on your phone, open
the app and continue.
2. To activate the Bluetooth pairing
sequence press the UP and DN buttons
on the control panel at the same time
then release. (See picture below).
