Auto Stop:
To set or to change the Auto Stop positions please refer to the inlcuded Auto Stop
instructional manual. .
Operating the AC Motor:
When the lift is going “up” the gear head should be going clockwise. When the lift is going
“down” the gear head should be going counterclockwise. If it the opposite direction this
means your lift was let down too far and is backwound. To fix this, let the lift down, when
it runs out of cable it will wind itself up correctly and start going up. If you have a remote
control and the lift is going down while pressing up or going up while pressing down this is
the reason why. Please follow the steps above to fix it.
Control Panel:
The control panel works the same as the remote controls. Press UP to go up and DN to
go down. Press the light button to turn the canopy light on or off. Press the lock/unlock
button for 5-10 seconds to lock the control panel. Press it again for 5-10 seconds to unlock
the control panel. When the control panel is locked the lights will blink for a set amount
of time and then stop. The Bluetooth App will still work when the control panel is locked.
When plugged into power the READY light will be a solid green and the Bluetooth symbol
will blink blue. When you pair a phone through bluetooth the light will be a solid blue and
no longer flash. The STATUS light will turn solid red when any button is pushed. If the
remotes work and the control panel doesnt or vise versa, unplug the unit from power for 2
minutes. If the control panel is locked the lights will flash when you press any button.
Off-Season Storage:
We recommend our storage cover for your motor if you are going to leave it sit outside
during the winter months. Our storage cover will breathe and let moisture out while your
not using your motor. If you decide to cover the motor with a bag instead, make sure not
to seal it completely or condensation can develop and the warranty will be void.
Power Outage:
In case of a power outage, use the provided back up bit (inside white floatie) on the end of
the shaft with your drill. Visit our website to watch a video on how to use the back up bit.
Power Requirements for AC:
All power used on your dock or lift needs to be GFI Protected at the shoreline.
Extension Cords must be 12/3 and under 150 feet. Circuit Breaker 20 AMPS GFI.
Maintenance:
Our motors are self-lubricating and do not need any maintenance.
Canopy Lights:
We offer Canopy lights that can plug into your unit and are controlled by the remotes. If
you use a different brand of canopy lights they might not work.
Website:
Go to www.lifttechmarine.com for more information, troubleshooting and how to videos.
We would like to take this opportunity to say thank you. We value you, as a customer.
Should you ever have an issue please give us a call at 866-319-8877 or send us an email at
Summary of Contents for AC AUTO STOP GEN 2
Page 1: ......