background image

Lift-Rite, 

Tel:

 Toll Free from USA: 1-800-558-6012, Greene, NY 13778, Publication Number 1130442/001E ©2022                                                                    Dated 23 Sep 2022

13

• Brakes shall be set and wheel blocks shall be in place to prevent movement of trucks, trailers or railroad cars while 

loading or unloading. Fixed jacks may be necessary to support a semitrailer when the trailer is not coupled to a 
tractor. The flooring of trucks, trailers, and railroad cars shall be checked for breaks and weakness before they are 
driven onto. (m) (7)

• Only approved industrial trucks shall be used in hazardous locations. (m) (11)

• All traffic regulations shall be observed, including authorized plant speed limits. A safe distance shall be 

maintained approximately three truck lengths from the truck ahead, and the truck shall be kept under control at 
all times. (n) (1)

• The driver shall be required to slow down and sound the horn at cross aisles and other locations where vision is 

obstructed. If the load being carried obstructs forward view, the driver shall be required to travel with the load 
trailing. (n) (4)

• Under all travel conditions the truck shall be operated at a speed that permits it to be brought to a stop in a safe 

manner. (n) (8)

• Stunt driving and horseplay shall not be permitted. (n) (9)

• If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck 

shall be taken out of service until it has been restored to safe operating condition. (p) (1)

• Any power-operated industrial truck not in safe operating condition shall be removed from service. All repairs shall 

be made by authorized personnel. (q) (1)

• All parts of any such industrial truck requiring replacement shall be replaced only by parts equivalent as to safety 

with those used in the original design. (q) (5)

• Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the 

examination shows any condition adversely affecting the safety of the truck. Such examination shall be made at 
least daily. Where powered industrial trucks are used on a round-the-clock basis, they shall be examined after each 
shift. Defects when found shall be immediately reported and corrected. (q) (7)

Summary of Contents for LCR55





















Reviews: