Getting Started
Cables:
1
Mini USB cable
: Connects TV Walker to your PC's USB2.0 port (make sure that
this is connected before you install or launch the application).
* Plug in the primary USB connector to the computer; plug in the secondary USB
connector only if your PC/Notebook does not fully power the TV Walker. (See
diagram 1)
2
NTSC/PAL converters
: Connects your TV cable or antenna to TV Walker (use
one of these two devices, depending on whether you have cable or broadcast TV).
(See diagram 2)
3
Composite to S-Video adaptor
: Connects TV Walker to Composite
Video-format external devices, such as a DVD player or a VCR (devices that use
S-Video plug directly into TV Walker). (See diagram 3)
4
IR Extension cable
: Provides an external IR sensor to use with your remote
control. (See diagram 4)
5
Audio cable
: Transmits audio from external devices to TV Walker (no cable
required for audio from your TV cable or antenna). (See diagram 5)
Cable and connector diagrams:
Diagram 1 (Mini USB cable)
Diagram 2 (NTSC and PAL converters)
Diagram 3
(Composite to S-Video adaptor)
Diagram 4 (IR extension)
Diagram 5 (Audio cable)
(Primary USB connector
)
NTSC
PAL
(Secondary USB connector)
5
