LifeView FlyCAM-CF, User Manual, Page: 6 / 13

FlyCAM-CF Hardware
Proper Operations
Please insert FlyCAM-CF in the correct direction carefully into the PDA’s CF slot to
avoid damaging PDA and FlyCAM-CF.
After FlyCAM-CF was installed , please make sure the LED of FyCAM-CF is light
and then start to run the application software.
Notice : Please remember to remove it or power off PDA if FlyCAM-CF is not in use to avoid
consuming the PDA power .
If your PDA enter power saving mode , the video will be hung when you power on
PDA after. It is because the video stream is discontinued, please click any icon on
software to recover the stream.
If the video display becomes unstable or blocky , please check the PDA power is
enough. After charging power and do software reset , the video display will be OK.
5