background image

6

SECTION 2:  OWNER’S GUIDE

!

SEC 

2.1

Transportation

Use caution when transporting your canoe. Be sure to tie down your 
canoe firmly, but do not overtighten the straps. We do not recommend 
the use of ratcheting straps, as these can easily be overtightened and will 
damage the canoe.

When transporting the canoe, we highly recommend using a canoe carrying kit.  
Make sure to balance the load evenly on your vehicle. Rest the canoe upside down 
on pads or a padded rack as shown below. To ensure stability, make sure there are 
two anchor points tied to each end of the canoe, and strap it twice around the belly. 

SEC 

2.2

Storage

Be sure to empty the canoe of all water.  You should clean the canoe by rinsing 
with freshwater, especially if the canoe has been used in salt water or becomes 
muddy.  Store the canoe out of direct sunlight.

Note: Emotion Kayaks is not responsible for damage to your 
vehicle. Consult your owner’s manual for any weight or load 
restrictions before attempting to transport your canoe.

!

Note: DO NOT overtighten the straps when securing the 
canoe to your vehicle. The use of ratcheting straps is not 
recommended. Overtightened straps can damage the canoe.

Summary of Contents for 90658








Reviews:

Related manuals for 90658