FIGURE 1
FIGURE 2
To unfold, hold the Hand Grip at the top of the back seat, unfold the Foot Platform,
and push down on the seat until the power chair opens fully.
(See Figure 1)
To fold, make sure the power chair is in power mode
(See Motors on page 5)
and pull
the clip from the frame at the bottom center of the back rest.
(See Figure 2)
While holding the Hand Grip, pull the seat up with the other hand until the power
chair is closed. Then fold in the Foot Platform.
(See Figure 3)
You can then use the Hand Grip to pull the power chair like luggage (with the
Motor in Free Wheel Mode). The power chair will stand upright (with the Motor in
Power Mode).
(See Figure 4)
1
2
3
ASSEMBLY INSTRUCTIONS
4
From the front of the power chair, slide the Battery into the pocket under the seat
pushing the power cord through the back and fasten the velcro tab to hold
the Battery in place.
Installing and Charging the Battery
Read entire manual prior to operating your power chair and save
this manual for future reference. If you do not understand any part of this manual
or require additional assistance, contact your Lifestyle Mobility Aids Dealer.
4
Never connect the battery charger to a power source before connecting it to
the power chair.
Unfolding and Folding your Power Chair
FIGURE 3
FIGURE 4
1
FIGURE 5
Then connect the ends of the power cord at the
bottom center of the back rest and under the
armrest with the joystick.
(See Figure 5)
To charge the Battery, connect the Charger into
the charging socket at the back of the Joystick
and then plug the Charger into the power source.
You can also take the Battery out of the pocket
to charge it directly.
2
3
