5
Be very careful when you use this stove under 0°C. When the temperature is under 0°C,
the rubber joints may harden and cause a gas leak.
Always make sure that the gas does not leak before and after the stove ignition.
The use of a stove whilst leaking may cause fires, burns, serious injuries or death.
Keep children away from the stove and the gas bottle - Lifestyle recommends a distance
of more than 3 meters.
Never leave a hot or ignited stove unattended.
When installing the flexible gas hose,it should far away from any hot and sharp objects.
When changing the flexible gas hose,it is necessary to follow the criteria set down
according to the local standards in force.
2) Installation of the stove
1. Remove any combustible material or flammable liquids or vapours from the cooking
area.
2.Put the stove on a solid, stable and flat surface to ensure the stability of the stove.
3. Totally open the pan supports.
4. The flexible gas hose should far away from the hot and sharp objects to ensure that it
is not subjected to twisting or damage.
5. The cooking area should be well ventilated.
6. When changing the gas cylinder, it must be carried out away from any source of
ignition.
7. In order to protect the surface, the temperature of the surface on which the stove is
placed cannot exceed 50k.
WARNING
Move away any combustible material from more than 1.2 meters of the ignited
stove or a stove you want to turn on.
Move away any flammable liquid or vapours from more than 7.6 meters of the
turned-on
stove or a stove you want to turn on.
This stove can set fire to combustible material, liquids or flammable vapours and
lead to fire, burn, serious injuries or death.
Move away any empty gas bottles from the stove burner and any heat sources.
Isolate any empty gas bottlesl by moving them away from the burner as much as
possible.
This appliance must be kept away from any inflammable materials
3) Ignition of the stove
1. Keep a match or a lighter lighted above the burner head.
2. Open the control valve to release the gas and light the burner.
3. If the burner has not lit, turn off the control valve, waits 5 minutes and repeat step1.
4. When the burner is alight you can adjust the flame by rotating the control knob on the
gas valve.
5.
To turn the stove off, turn the cylinder valve or regulator switch to the OFF
position
.WHEN THE FLAME HAS EXTINGUISHED turn the control knob on the gas
valve to the off position.
6. Wait at least 5 minutes for the appliance to cool properly before cleaning or moving.
