3
SET UP
Bench Assembly
Place the bench with the seat facing down on a level surface. Insert the 2 legs
with LARGE suction tips into the end of the frame that has the seat handle
slots. Depress the brass button at the top of the leg and push the leg into the
frame. Ensure that the brass button “clicks” and locks into position. Following
the same procedure, insert the 2 legs with small suction tips at the other end
of the bench [A].
Insert the backrest extensions into the backrest tubes. Depress the brass
button on the backrest tube and ensure that the brass button “clicks” and locks
into position [B].
Turn the bench on its side and insert the backrest extensions into the 4 tubing
slots under the seat. Depress the brass button on the backrest extensions and
ensure that the brass buttons “click” and lock into position from the top tubing
slots . NOTE: The backrest can slide on either side of the bench depending on
the direction the you will be sitting [C].
Place the bench upright so that it is resting evenly on all four legs and insert
the seat handle into the seat handle slots. Depress both brass buttons on each
side of the handle and push down until the brass buttons “click” and lock into
position [D].
To adjust the legs and seat height, depress the brass push button on the legs
and slide each leg to a desired height. Be sure all 4 legs are level, stable, and all
push buttons fully engaged before using. NOTE: The 2 legs with LARGE suction
tips should be used inside of the shower.
Your Lifestyle Mobility Aids product is warranted to be free of defects in materials and workmanship for the
lifetime of the original consumer purchaser.
This device was built to exacting standards and carefully inspected prior to shipment.
This Lifetime Limited Warranty is an expression of our confidence in the materials and workmanship of our
products and our assurance to the consumer of years of dependable service.
In the event of a defect covered by this warranty, we will, at our option, repair or replace the device.
This warranty does not cover device failure due to owner misuse or negligence, or normal wear and tear.
The warranty does not extend to non-durable components, such as rubber accessories, casters, and grips,
which are subject to normal wear and need periodic replacement.
Should you have any questions regarding your Lifestyle Mobility Aids product or warranty please call your local
dealer or contact us directly.
1
2
3
4
5
A
B
LIFETIME LIMITED LWARRANTY
› Use a non-abrasive detergent or household cleaner with warm water.
› Rinse with warm water and wipe dry.
› DO NOT USE AN ABRASIVE CLEANER OR CLOTH with this product, as damage may ensue.
CLEANING
Do not use high pressure cleaners, steam cleaners or harsh, caustic chemicals for cleaning.
D
C
Summary of Contents for B3300
Page 1: ...B3300 Transfer Bench...
Page 4: ...Some Additional Products...
