Lifestand LSC, User Manual

Page: 25 / 44

25
LSC User’s Manual.
25
On/Off Button
The On/Off button applies power to the control system electronics, wich in turn supply power
to the wheelchair’s motors.
Horn Button
The horn will sound while this button is depressed.
Maximum Speed Buttons
These buttons decreases/increases the wheelchairs maximum speed. Depending on the way
the control system has been programmed a momentary screen may be displayed when these
buttons are pressed.
Mode Button
The Mode button allows the user to navigate through the available operating Modes for the
control system. The available modes are dependant on programming and the range of auxil-
iary output devices connected to the control system.
Profile Button
The profile button allows the user to navigate through the available Profiles for the control sys-
tem. The number of available Profiles is dependant on how the control system is programmed.
Depending on the way the control system has been programmed a momentary screen may be
displayed when the button is pressed.
Hazard Warning Button and LED *
This button activates/deactivates the wheelchairs hazards lights. This function is used when the
wheelchair is positioned in a way making it a obstruction for others. Push the button to activate
the hazard lights and push it again to deactivate them. When activated the indicator LED will flash
in sync with the wheelchair’s indicators.
Lights Button and LED*
This button activates and deactivates the wheelchair’s lights. Depress the button to turn the
lights on and depress the button again to turn them off. When activated the lights LED will
illuminate.
Left Indicator Button and LED*
This button activates and deactivates the wheelchair’s left indicator. Depress the button to turn
the indicator on and depress the button again to turn it off. When activated the left indicator LED
will flash in sync with the wheelchair’s indicator.
Right Indicator Button and LED*
This button activates and de-activates the wheelchair’s right indicator. Depress the button to turn
the indicator on and depress the button again to turn it off. When activated the right indicator LED
will flash in sync with the wheelchair’s indicator.
*
Only active if the wheelchair is provided with lights.
m
WARNING
Do not use the On/Off Button to stop the wheelchair unless there is an emergency. If you do, you may get thrown out
of the chair or shorten the life of the wheelchair drive components.