background image

14

Daily Cleaning

It is recommended to wipe the treadmill down after each use to keep the 

treadmill clean and dry. A mild detergent may be used at times to help 

remove all dirt and salt from the belt, painted parts and the display.

Monthly Cleaning

This cleaning includes removing the motor cover and cleaning around the 

motor and electronics. It is recommended to clean the motor compartment if 

the treadmill is in an area where there might be plush carpet fibers that could 

get pulled up into the motor compartment. It is a good idea at this time to 

tighten all assembly hardware and check power cord for damage, or anything 

else that would indicate the need for service.

Safety and Integrity

The safety and integrity designed into the machine can only be maintained 

when the treadmill is regularly examined for damage and repaired. Worn 

or damaged components shall be replaced immediately or the treadmill 

be removed from service until the repair is made. Pay special attention to 

components most susceptible to wear.

!

WARNING: Keep treadmill stable on flat ground. 

WARNING: Unplug the power cord before removing the motor cover.

IMPORTANT: If service is required, turn the power off and remove the 

power cord to ensure the unit cannot be used. Let all other users know 

the treadmill needs service.

CAUTION: Acidic cleaning detergents may damage painted or powder 

coated surfaces and should not be used. Such cleaners may void the 

LifeSpan warranty.

!

Maintenance and Tips

Summary of Contents for Workplace DT-3
























Reviews: