LifeSpan TR2000e, Owner'S Manual

Page: 27 / 54

25
Step 3: Upright Post Cover
The upright post covers are pre-attached on each of the posts, but need to
be re-positioned at the base where the upright post meets the frame.
A. Slide the left upright post cover (4) down to the motor cover.
B. Gently flex the bottom of the upright cover away from the motor cover
while pushing down to the base of the upright.
C. Align the plug on the inside of the cover with the hole in the upright
post. Firmly press cover in towards the upright base to lock into final
position.
Step 4: Handlebar Attachment
A. Place the M8 x 100L bolt (11)
and M8 washer (12) through
the left handlebar and into
the uprights being careful not
to damage any wires running
through the handlebar. Repeat
for the right handlebar.
B. Loosely thread both bolts
into the upright prior to
tightening.
C. Fully tighten both handlebar
attachment bolts.
Assembling Your Treadmill
4
A B C
Align and press
M8 x 100L
(x2)
M8 Washer
(x2)
6mm Allen
Wrench