background image

11

User Setup Programs 

- there are two user set up programs that provide the ability to establish 

customized workout programs specific to a users workout requirements. For each user set up 
program, the workout time is set and then 12 unique workout segments are set up by the user. 
For each segment the user can preset the speed and incline of the segment by using the up and 
down arrow buttons and then pushing the mode button to set each program.

Once a program is set up the user simply scrolls to the User1 or User2 program and pushes the 
start button. To modify the program after it is established, select the program and then push the 
mode button.

Target Heart Rate Program

 - The TR2000 includes 2 My Zone heart rate programs, a constant 

heart rate program and an interval heart rate program. The HRC1 is a constant heart rate program 
that lets you select a single heart rate that you want to maintain during the workout. After a 3 
minute warm up the console will automatically adjust the speed and incline every 10 seconds to 
get your heart rate up to the preset level and then maintain your heart rate during the workout. 
The HRC2 program is an interval heart rate program that lets you select a LOW target heart rate 
and a HIGH target heart rate. After a 3 minute warm-up the console will adjust the speed and 
incline every 10 seconds to raise your heart rate to the preset LOW target and maintain your heart 
rate for 2 minutes at this level. Then the console will adjust the speed and incline to raise your 
heart rate to the HIGH target that was selected during program set-up. After holding your heart 
rate at the HIGH setting the console will begin to lower your heart rate and repeat the process. It 
is recommended that you set the program time to 25 minutes or higher to use this program effectively.

Summary of Contents for TR2000-HRC





























Reviews: