background image

 

 

 

                                                             

   LIFESPAN SPRINTER        

                                            Page3 

z

 

The pulse sensors are not medical devices. Various factors, including the user’s 

movement, may affect the accuracy of heart rate readings. The pulse sensors are 
intended only as exercise aids in determining heart rate trends in general. 

z

 

Use handrails provided; they are for your safety. 

z

 

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for 

use on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue. 

z

 

Allowed temperature: 

5 to 40 degrees.

 

Remove the safety key after use to prevent unauthorized treadmill operation.  

 

 

1.1 IMPORTANT ELECTRICAL INFORMATION 

WARNING! 

z

 

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route 
the power cord away from any moving part of the treadmill including the elevation 

mechanism and transport wheels. 

z

 

NEVER remove any cover without first disconnecting AC power. 

z

 

NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use 

outdoors, near a pool, or in any other high humidity environment. 

 

For your information, please note following electronical specification of Treadmill: 

a). The rated power input is 850-900W;  

b), The power voltage supply is 240V±10%; 

c), The rated frequency is 50-60Hz; 

 

1.2 IMPORTANT OPERATION INSTRUCTIONS 

 

z

 

Be sure to read the entire manual before operating your machine. 

z

 

Understand that changes in speed and incline do not occur immediately. Set your 

desired speed on the computer console and release the adjustment key. The computer 
will obey the command gradually.  

Summary of Contents for SPRINTER XL





























Reviews: