22
same time.
•
After each adjustment, the treadmill needs to run for 1-2 minutes to verify the adjustments.
Please adjust again if necessary.
•
Press the function key to stop treadmill.
CAUTION: DO NOT OVERTIGHTEN THE BELT. PLEASE MAINTAIN ORIGINAL FACTORY BELT TENSION.
EXCESSIVE BELT TENSION WILL CAUSE DAMAGE TO MOTOR.
•
Power off the treadmill and unplug the power cord.
•
Lift the edge of the walking belt and smear the inner surface with silicone oil.
•
Start the treadmill to run at a speed of 3km/h (2mi/h) for 10-20 seconds.
•
5-10ml of silicone oil is required for each lubrication. Excessive silicone oil may cause slipping and
affect normal use.
•
Lubricate the walking belt every three months.
3. Walking Belt Lubrication
| MAINTENANCE AND ADJUSTMENTS
Summary of Contents for LFT 05 WalkingPad M2
Page 31: ...31...
Page 32: ...WWW LIFESPANFITNESS COM AU...
