background image

 

 

  Do not place anything under the product. 

  Use gloves during assembly and disassembly. 

  Outdoor products should be equipped with a device that in strong wind conditions avoid displacement 

due to wind (e.g. steel bars in the ground or loads like sand bag or water bags). 

  In certain areas during winter, snow buildup and the low temperatures can damage the product. It is 

recommended to remove snow buildup and to store the product indoor. 

  We strongly recommend visual inspections every 3 months to insure the integrity of the entire product. 

Replace any parts as necessary.     

SAFETY INSTRUCTIONS 

  The safety instructions of the product should always be considered and obeyed.   

  Using the product may result in permanent injury such as paralysis, or even death. Falling off the 

product may lead to injuries, particularly to the back, neck or head.   

  No clothes with hooks or lose parts should be worn or carried during product usage in order to avoid 

hooks getting caught and causing injury. 

  Moving the product whilst assembled may affect the integrity of the frame. Should it be necessary to 

move the product, please consider the following: 

1.)  Force to be evenly spaced around the frame to lift the product off the ground 
2.)  The product must be carried horizontally 
3.)  Use caution whilst moving as it could bend the product frame. 

  Users should be familiar with the assembly manual. This manual contains assembly guidance; selected 

precautionary measures as well as recommendations for servicing and maintenance of the product, in 
order to ensure safe and fun usage. 

  It is the responsibility of the owner or the supervisor to guarantee that all users of the product are 

informed sufficiently of all warning references and safety instructions. 

 
For the supervisor: 
The supervisor’s role is to make sure users are aware of all safety precautions and that these precautions are 
enforced. When a supervisor is not available, the product may be disassembled or covered to limit access.   

  The product can be only used if it is in good condition, worn or damaged parts should be replaced. 

  Objects, which could be dangerous to the user, should be away from the product 

  Avoid unauthorized and unsupervised use of the product. 

  Do not use the product under influence of alcohol or drugs (incl. medicines). 

  Do not use the product or its attachments as a jumping platform. 

 

 

Summary of Contents for PE59











Reviews: