lifeSMART BLEND, User Manual, Page: 13 / 16

Cut off the electrical power supply and make sure the wiring is not
charged.
Take out the smart control accessory and install it according to the
wiring instruction, make sure all the wires are placed firmly.
Place the wires in the cassette orderly, and fix the smart control
accessory to the cassette with fixing screws.
Take out the switch panel and fix it to smart control accessory, make
sure that the upper and lower two buckles are in place, otherwise it
may not be able to be used normally due to poor contact.
Restore the power supply, the device will turns on automatically.
After configuration of the Smart Station, choose “ Add Device ” in
LifeSmart App, select “ BLEND Switch PRO ” or “ BLEND Switch Lite ”
to enter pairing process. Follow the instruction on the app to finish
pairing.
INSTALLATION
1
2
3
4
6
5