LifeSize Gateway-PRI, User Manual

Page: 70 / 196

62 LifeSize Gateway User Guide
Configuring Gateway Settings
C
ONFIGURING
G
ATEWAY
S
ETTINGS
In the Settings tab of the LifeSize Gateway interface, you can configure
gatekeeper and Interactive Voice Response (IVR) addressing, the type of
connection to the IP network, dialing delimiters, media encoding/decoding
protocols, Quality of Service levels, which events cause the LifeSize Gateway to
send SNMP traps, LifeSize Gateway resource levels for T.120 enabled and
audio transcoded video calls, security settings, and advanced settings such as
load balancing support.
The following topics discuss the settings you can configure in the Settings tab:
Configuring Basic Gateway Settings on page 62
Configuring IP Connectivity Settings on page 63
Configuring IVR Settings on page 70
Configuring Outgoing Call Delimiters on page 72
About Encoding/Decoding Protocols on page 72
Configuring Encoding/Decoding Protocols on page 75
Configuring ISDN Channel Bonding Settings for Downspeeding on
page 76
Configuring Quality of Service Settings on page 77
Configuring Alert Indications on page 80
Configuring Gateway Resources for Calls on page 87
Configuring Gateway Encryption on page 89
Configuring Advanced Settings on page 90
About DTMF Settings on page 96
Configuring Advanced Commands on page 100
C
ONFIGURING
B
ASIC
G
ATEWAY
S
ETTINGS
In the Basics section of the Settings tab, you can set the LifeSize Gateway
identifier, which is the name that the LifeSize Gateway uses when registering to
a gatekeeper and when dialing to endpoints.
Procedure
1
In the LifeSize Gateway interface, on the sidebar, click
Gateway (if not already selected).
2 Click the Settings tab.
3
Click the Basics button (if not already selected).