LifeSize Gateway-PRI, User Manual

Page: 113 / 196

Configuring the LifeSize Gateway 105
About Gateway Services
5
In the Description field, enter or edit the description of the
service (up to 31 characters in length).
6 In the Call type field, select the call type for this service:
Video or Voice .
7
In the Bit rate field, select the maximum bit rate you want for
this service. If you select Auto , the LifeSize Gateway
determines the ISDN or serial call rate according to the bearer
capability received in the setup message from the IP network
endpoint.
Note
The Auto setting is for video calls only.
If the IP network endpoint has a configured bit rate that is not
one of the options listed in this field, the LifeSize Gateway uses
the default bit rate configured in the
Default Service Bit Rate
field in the Advanced section of the Settings tab.
Note
If the Ignore caller bearer rate and force service rate field is
selected when you define a bit rate for a service, the service uses the defined
bit rate. If the
Ignore caller bearer rate and force service rate is deselected,
the bit rate you define serves as the maximum limit for that service.
Related Topics
Bonding Synchronization
B
ONDING
S
YNCHRONIZATION
(Gateway-PRI only) The Advanced dialog box enables you to configure a
bonding synchronization setting for the specified service.
Procedure
1 Send the ServiceOption advanced command with a parameter
of
enable to activate the Advanced button.
For information on sending advanced commands, see
Configuring Advanced Commands on page 100.