manualshive.com logo in svg

Lifescan Pocket Scan Blood Glucose Monitor System, Owner'S Booklet

Share
Download
Lifescan Pocket Scan Blood Glucose Monitor System Owner'S Booklet Download Page 11

1

The Complete PocketScan™ Blood
Glucose Monitoring System

The PocketScan Blood Glucose Monitoring
System consists of three main products: the
PocketScan™ Blood Glucose Meter,
PocketScan™ Test Strips, and PocketScan™
Control Solution. These products have been
designed, tested, and proven to work togeth-
er as a system to produce accurate blood glu-
cose test results. Use only PocketScan Test
Strips and PocketScan Control Solution with
the PocketScan Blood Glucose Meter.

Your PocketScan™ System includes:

•

PocketScan™ Meter

•

PocketScan™ Test Strips

•

PocketScan™ Control Solution

•

Penlet II Automatic Blood Sampler

•

Sterile Lancets

•

Owner’s Booklet

•

Sporty Carrying Case

•

Quick Reference Guide

•

Warranty Registration Card

•

Record Book

•

Two 1.5 V #357 silver oxide batteries
(pre-installed).

GETTING
STARTED

UK PocketScan OB  10/3/00  4:17 PM  Page 1

Summary of Contents for Pocket Scan Blood Glucose Monitor System

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands