66
OPTIONS
time and date of each test you per-
form. You may need to change the
time setting in your meter in order
to have the correct time and date
appear with your test result. You
will also need to reset the time
whenever there is a change to or
from Daylight Savings Time. (The
accuracy of your test results will
not be affected if you do not set the
clock to the correct time.)
Setting the Time
Enter the options mode. Use the M
button to choose the Time option.
The current time will show. Press
the C button to change the time; the
hour and
am
or
pm
will flash. Press the
C button again to advance the
hour to the correct setting. Press the M
button and the minutes will flash. Use
the C button to change the minutes.
Press the M button to see the new
time setting (the colon will flash).
Press the M button again to move to
the next option.
Note:
When the time and date are
changed, the calculated values for 14-
day, 30-day, and event averages may
change. These averages are calculated
from the results obtained during the
LSC-96-003 own. manual 7/26/97 1:45 AM Page 66
